Electromagnetic Flowmeter
Series 6400

Line sizes from 10 mm to 3000 mm
(model-specific)

Introduction

Electromagnetic flow measurement has been in use around the world for 50 years and more, as witnessed by the popularity of these meters that continues unabated in virtually all sectors of industry. Electromagnetic Flowmeters can be used to measure all electrically conductive liquids (> 5 µS/cm) with or without solids, e.g. water, wastewater, sludge, slurries, pastes, acids, alkalis, juices, fruit pulp, etc.

Adept MagFlow 6410 Full Bore Electromagnetic Flowmeter is suitable for the most demanding applications. It is based on Faraday’s law of Electromagnetic Induction. The meter features flanged construction and is available with choice of liner and electrode material. All meters consist of a sensor and a converter that may be mounted either integral to the sensor or remotely with a field mount kit. Adept Flowmeters are calibrated at our own Water Flow Calibration Facility. It uses the primary method of measuring the water flow by gravimetric principle. The facility is designed for calibration of flowmeters under controlled and stable flow conditions.

Salient Features

  • Based on Faraday’s law of electromagnetic induction
  • Flow tube sizes 10 mm to 3000 mm and above
  • Coil assembly in hermetically sealed welded construction
  • Integral or remote transmitter
  • Field interchangeable electronics
  • High linearity due to characteristic magnetic field
  • Absolute zero stability and noise elimination due pulsed DC excitation
  • High long-term stability and reliability

Applications

  • Chemical, petrochemical and process industries
  • Fertilizers industries
  • Pharmaceutical industries
  • Food and drug industries
  • Sugar, beverage industries
  • Paper and pulp industries
  • Water and waste water management
  • Dredging industries
  • Mining industries

Product Selection Guide

Parameters Specifications
Transmitter Type Integral, Remote, Integral without display
Power Supply 18 – 60 V DC, 80 – 300 V AC/DC
Output 4 – 20 mA DC, Pulse output, Relay output
Communication Interface RS 485 (Modbus RTU), GSM, GPRS, HART, UART
Data Logger Built In, External
Flowmeter Size (DN) 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 9000, 1000, 1100, 1200, 1400, 1500, 1600, 1800, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800, 2900, 3000
Pressure Rating (kg/cm2) 10, 16, 25, 40
Flange Standard ANSI 150/300/600, DIN PN 10/16/25/40, IS 1538, BS 10 Table D/E/H, Wafer, SMS, Tri Clamp
Flange Material Carbon Steel, SS 304, SS 316, SS316L
Sensor Lining Hard Rubber, Neoprene, PTFE, Polyurethane, PFA, Polypropylene
Electrode Material SS 316, SS 316L, Hastelloy C, Titanium, Tantalum, Platinum
Earthing Rings SS 316, SS 316L
Measuring Tube SS 304, SS 316, SS316L
Coil Housing SS 304, SS 316, SS316L
Protection Class IP 65, IP 67, IP 68
Approval None, Flame-proof
Working Temperature Integral PTFE – 120℃, Remote PTFE – 180℃, Others – 70℃
Accuracy ± 0.5% of reading (± 0.2% consult factory)

FAQ

Share..Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedInPin on Pinterest