Signal Isolators

Loop Powered DC Current Isolator 6210
Loop Powered DC Current Isolator 6210
Adept  Loop Powered DC Current Isolator 6210 provides galvanically isolated 4 - 20 mA DC output current proportional to 4 - 20 mA DC input current. The isolator derives power from the input itself and therefore no external supply is required. Use of latest circuit techniques and quality components ensure reliable operation over long periods. Read more


DC Current Isolator 6220
DC Current Isolator 6220
Adept  DC Current Isolator 6220 provides galvanic isolation between field DC Current signal and control room equipment, which utilises reliable optical isolation technique. Higher DC current can be measured with external shunt. Read more


DC Voltage Isolator 6230
DC Voltage Isolator 6230
Adept DC Voltage Isolator 6230 provides galvanic isolation between field DC Voltage signal and control room equipment, which utilises reliable optical isolation technique. Read more


Temperature Transducer 6240
Temperature Transducer 6240
Adept Temperature Transducer 6240 provides galvanically isolated measurement of Temperature using a PT - 100 or a Thermocouple. Read more


Resistance Transducer 6250
Resistance Transducer 6250
Adept Resistance Transducer 6250 provides galvanically isolated measurement of Resistive Input like 2 Wire or 3 Wire Connection. A variety of DC Outputs are available. Read more


Transformer Tap Position Transducer 6260
Transformer Tap Position Transducer 6260
Adept  Transformer Tap Position Transducer 6260 measures the value of resistance on tap position changers, typically used on high voltage transformers. Each position on the selector has an equal value of resistance so that as the tap position is increased or decreased the value of resistance increases or decrease respectively. The Input is in  Read more


Data Scanner 8000
Data Scanner 8000
Adept Data Scanner 8000 replaces multiple analog DC Signal Transducers and combines 6 Programmable Channels in to a single product. The Product features user selectable Inputs such as mV DC, mA DC, V DC. The Inputs can be changed from Jumper Settings.The parameters are available through a galvanically isolated RS 485 Half Duplex or RS 232 Communi Read more