Electric Transducers & Power Meters

Power Line Meters
Power Line Meters
Adept Series 2200 Power Line Meter is suitable for simultaneous measurement of various electrical parameters of 3 Phase 3 Wire or 4 Wire electric power system. The values are displayed on the front three 7 segment LED rows, the information is also available through an galvanically isolated RS 485 (Half Duplex) or RS 232 Serial Communication Port Read more


AC Current Transducer 2010
AC Current Transducer 2010
Adept AC Current Transducer 2010 gives DC output that is proportional to an input sine wave AC Current. The output signal is calibrated for RMS value. AC Current Transducer with fast response time of 50 ms is also available. Transducer with Frequency up to 400 Hz can also be provided. True RMS model is also available. Read more


AC Voltage Transducer 2020
AC Voltage Transducer 2020
Adept AC Voltage Transducer 2020 gives DC output that is proportional to an input sine wave AC Voltage. The output signal is calibrated for RMS value.In HT application PT Ratio and Primary Side Range is specified to derive AC Input Voltage Range. AC Voltage Transducer with fast response time of 50 mSec. is also available.Transducer with Frequency Read more


Frequency Transducer 2030
Frequency Transducer 2030
Adept Frequency Transducer 2030 gives DC output that is proportional to an input frequency value. Special Frequency ranges are available on request. Read more


Power Factor Transducer 2041
Power Factor Transducer 2041
Adept Power Factor Transducer 2041 gives DC output that is proportional to Power Factor of the Electrical Network. The Transducer is suitable for balanced load conditions only, when used in 3 Phase 3 Wire, 3 Phase 4 Wire Electrical Networks.Power Factor Transducer suitable for unbalanced load conditions can also be provided.Power Factor Transduc Read more


Active Power Transducer 2050
Active Power Transducer 2050
Adept Active Power Transducer 2050  gives DC output that is proportional to Active Power of the Electrical Network. The Transducer is suitable for  balanced as well as unbalanced load conditions in 3 Phase 3 Wire or 3 Phase 4 Wire electrical networks. Active Power Transducer is available in Single Phase operation as well. Power Transduce Read more


Reactive Power Transducer 2050
Reactive Power Transducer 2050
Adept Reactive Power Transducer 2050  gives DC output that is proportional to Reactive Power of the Electrical Network. The Transducer is suitable for  balanced as well as unbalanced load conditions in 3 Phase 3 Wire or 3 Phase 4 Wire electrical networks. Power Transducer with input frequency up to 400 Hz can also be provided. Read more


Apparent Power Transducer 2050
Apparent Power Transducer 2050
Adept Apparent Power Transducer 2050 gives DC output that is proportional to input apparent power. For 3 Phase 3 Wire or 3 Phase 4 Wire electrical networks, Apparent Power Transducer is suitable for balanced as well as unbalanced load conditions. Apparent Power Transducer with input frequency up to 400 Hz can also be provided. Read more


Active Energy (Watt – Hour) Transducer 2051
Active Energy (Watt – Hour) Transducer 2051
Adept Offers  Active Energy Transducer 2051. The Transducer measures Active Energy of an electrical system. The Transducer is suitable for balanced as well as unbalanced load conditions in 3 Phase 3 Wire or 4 Wire applications.  It gives pulse output proportional to the measured Watt-hours. Read more


Multifunction Power Line Transducer 2052 (RS 485 Output)
Multifunction Power Line Transducer 2052 (RS 485 Output)
Adept Multifunction Power Line Transducer 2052 measures various electrical parameters of 3 Phase 3 Wire or 4 Wire electric power system and transfer the values by Modbus RTU Protocol. The values are available through an galvanically isolated RS-485 Half Duplex Communication Read more